MACROMEDIA COLDFUSION MX-CLUSTERCATS Manuel d'utilisateur télécharger pdf (Page 144)

134 Chapter 7 Optimizing ClusterCATS

5 Open the Advanced IP Addressing dialog box by right-clicking Network

Neighborhood. Select Properties. On the Protocols tab, select TCP/IP Protocol and

click Properties and then click Advanced.

6 Select the computer’s primary NIC in the Adapter field. Add the new IP address in

the IP Addresses region. You will use this address as the maintenance address and

machine address. Make a note of all IP addresses on the NIC.

7 Click OK, and OK again and click the Identification tab. Click Change.

8 Enter a new name for the computer in the Computer Name field. The name

corresponds to the new IP address that you just added. Do not change the Domain

field on this tab.

Note: The computer name on the Identification tab should only be a NetBIOS name,

not a fully qualified host name (FQHN). For example, support1.macromedia.com is a

possible FQHN. The first portion of this FQHN (support1) can be a NetBIOS name. Note

that support1 would also appear as the host name under the DNS tab in Protocols. The

domain under the DNS tab in this case would be macromedia.com. The Domain field on

the Identification tab is different; it has nothing to do with DNS but only corresponds to

your NT domain.

9 Close all open dialog boxes and restart the server.

10 For IIS 4.0: Reinstall the NT 4.0 Option Pack and then restart the server.

For IIS 5.0 or NES: Skip this step.

11 For IIS 4.0: You may need to reconfigure your websites using the Internet Service

Manager.

For IIS 5.0 or NES: Skip this step.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 155 156

Pas de commentaire

MACROMEDIA COLDFUSION MX-CLUSTERCATS Manuel d'utilisateur Page 144